Woven Arc Soap Dish — Sculptural Self-Draining Lattice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A generously sized, self-draining soap dish with sweeping curves and a sculptural crisscross lattice.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Woven Arc Soap Dish
A soap dish that refuses to look ordinary.
This generously sized dish combines sweeping curves with a woven crisscross lattice, creating a design that feels more like a small piece of architecture than a bathroom accessory. The open structure allows water to drain freely and air to circulate beneath the soap, while the interconnected lattice gives the long curved ribs strength and stability.
It looks fantastic in the shower—but it’s sculptural enough to earn a place on the counter, vanity or anywhere else you decide soap dishes are allowed to become art.
Important Printing Instructions
Print this model on its side—not upright in its normal-use position.
Rotate the model 90 degrees and place one of the flat side frames against the build plate. Enable tree supports to support the curved frame and lattice as they rise from the bed. Tree supports are strongly recommended because they reach the necessary overhangs without completely filling the open lattice with difficult-to-remove material.
Check the sliced preview before printing to confirm that the model is resting securely on its side and that the tree supports reach all unsupported curves.
