Case NRF24L01
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a compact custom enclosure designed for NRF24 device based on an ESP32 development board.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Open Community License v1.1
The device includes the following components:
ESP32 Dev Kit V1.1
NRF24L01+ with external antenna
TP4056 Li-ion charging module
0.96" I2C OLED display
Power switch
Three push buttons: BACK / PUSH / NEXT
18650 Li-ion battery
Battery holder
6 screws DIN7981 2.2x9.5
Custom 3D-printed enclosure
Assembly
The electronics are assembled using point-to-point wiring and soldering. No custom PCB is required for the assembly.
Electronic modules are installed directly into the enclosure. The enclosure uses integrated mounting posts designed for thermal staking / heat-melting installation. After positioning a component, the plastic mounting post is heated and slightly melted with a soldering iron, forming a mechanical retaining head.