Spacer / Holder for Behringer P1 Headphone Amp to a Temple Audio Solo-18 Pedalboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer / Holder for Behringer P1 Headphone Amp to a Temple Audio Solo-18 Pedalboard using the Temple Audio grid pattern.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Spacer / Holder for Behringer P1 Headphone Amp to a Temple Audio Solo-18 Pedalboard using the Temple Audio grid pattern. This way the Behringer P1 HP-Amp can be secured under the Solo-18 Pedalboard. Ideally for wired in-ear use.
The placement of the Amp is recessed, so no dials can be turned my accident.
Steps for assembly:
Remove Battery cover from the Behringer P1
Use M2 screws (5-10mm long) to firmly attach the spacer / holder to the Behringer P1.
Locate at least three holes using the pedalboards grid pattern, where you want to place M4 threaded Inserts into the Spacer / Holder
Screw the P1 / spacer combo onto the pedalboard with flattop M4 screws