1 / 4
ArcDock – One-Piece Vertical Stand for MacBook Air M4 (13-inch & 15-inch) — zdjęcie 1
1 / 4

ArcDock – One-Piece Vertical Stand for MacBook Air M4 (13-inch & 15-inch)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ArcDock is a clean, space-saving vertical dock designed for the 13-inch and 15-inch M4 MacBook Air. It prints as one sol

Ocena
5 / 5
Polubienia
0
Pobrania
37
Wydruki
1
Wyświetlenia
176
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Standard Digital File License

ArcDock keeps a closed MacBook Air upright, protected, and neatly stored while freeing up valuable desk space.

Instead of using a generic rectangular shape, the stand has two tapered support wings with a smooth arched top line, rounded lower shoulders, and a softly tapered base. The slot is narrower near the bottom for stability and wider at the top, making it easier to insert the laptop without catching its edges.

The model is designed as a single connected part. There is no assembly, no hardware, and no support material required in the supplied print orientation.

Print the model in the supplied orientation, with the large flat base directly on the build plate. Do not rotate or scale the model.

Recommended settings:

- Material: PETG recommended; PLA is also suitable
- Nozzle: 0.4 mm
- Layer height: 0.20 mm
- Perimeters/walls: 4
- Top and bottom layers: 5
- Infill: 15–20% gyroid or cubic
- Supports: Not required
- Brim: Optional, 3–5 mm
- Minimum build plate: 200 × 80 mm
- Recommended build plate: 220 × 220 mm

After printing, remove any stringing from the slot and check the model for cracks or layer separation.

Apply 0.8–1.0 mm self-adhesive felt, thin EVA foam, or silicone tape to both inner walls and the recessed bottom channel. The protective liners are part of the intended fit and prevent the aluminum laptop from touching hard plastic.

Insert the closed laptop slowly during the first fit test. It should slide in without force.

Designed for a bare 13-inch or 15-inch M4 MacBook Air. Laptops with hard shell cases may not fit.

LICENSE

Standard Digital File License. Redistribution, resale of the digital files and unauthorized commercial use are not permitted. For commercial licensing, contact the creator through the Printables profile.

Tagi