FX DRS Barrel Clamp Picatinny Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FX DRS Barrel Clamp Picatinny Rail (long 35mm, on diameter 34mm, M4 screews, inserted heat nuts, PETG)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A barrel clamp designed for the FX DRS, providing a 35 mm Picatinny rail for mounting a bipod or other compatible accessories. The clamp is designed for a 34 mm barrel diameter and is secured using two M4 screws with embedded heat-set nuts.
Specifications
Compatible with: FX DRS
Clamp inner diameter: 34 mm
Rail length: 35 mm
Rail type: Picatinny / MIL-STD-1913
Fasteners: 2× M4 screws 25mm
Inserts: embedded heat-set nuts
I used material: PETG
Printing recommendation
Print the model from PETG or another suitably strong material. The model requires two M4 heat-set nuts.
If the clamp does not fit tightly enough, apply electrical tape inside the clamp. This will improve the fit and help prevent scratches on the barrel.
Print with the shuriken (star) side facing down. So holes get properly printed without support. I do not recommend to "iron" the top surface.