Loctite Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for quick easy access to store loctite. Easily see what you have and where it is at.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Open Community License v1.1
Why I Designed This
I wanted something to keep all my different loctite (Red, Blue, bearing mount, ect) in the same place in the service truck.
I have been using this in the service truck for a couple years ( I used a small bolt and magnets and used the holes on the design. Then just put it on the door or inside of a cabinet.
Has worked great for me and my loctite never goes missing, easy to see when one is missing or when I'm out of one.
I liked having one in the service truck so I printed one for the garage that just sits in the top of the tool box but is handy. Also use it to keep different things like JB weld, Super glue, different tubes of silicon, and even pens/ markers.
Model information
Used PLA with a 15% "Grid" infill - print takes 7h 47m and uses 303.44g of filament
Does use a decent amount of filament but is something I found I only print a couple of so not that big of a deal to me
No support required
Have printed both of mine out of PLA and have had no issue with them