1 / 4
Century Graphic Lens Board - Compur / Copal No. 0 (2x3 Baby Graflex) — zdjęcie 1
1 / 4

Century Graphic Lens Board - Compur / Copal No. 0 (2x3 Baby Graflex)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount an Compur / Copal No. 0 No.0 Shutter to a 2x3 Crown Graphic

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
25
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

A 3D-printable lens board for mounting an Compur / Copal  No. 0 Shutter  on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Crown Graphic camera.

Yes. The Compur and Copal shares the same geometry and often interchangeable.

Application Notes:
- Tested with PLA and PETG
- Print camera side up. 
- 0.20mm layer height.
- Use scarf joints and randomize seam positions.
- Avoid crossing perimeters.
- 15% Gyroid infill.
- Print in Black or Matte Black filament.
- Bellow draw. The baby graphic has a bellow draw of 7¾ inches, or about 196 mm.  That might limit the focal lengths you can actually use on this camera. 

Tagi