Liczymy pasujące modele…
A lens cap for your Kodak H35! There are 2 versions of the model, one is just the lens cap and the other is the lens cap with an arm that covers the viewfinder; This works as a great reminder to take the lens cap off before shooting. I…
This body allows you to combine an Ektar 127mm f/4.7 lens with Mamiya Press 2x3, 6x7, 6x9, or Multi-format film backs. Required: https://www.prusaprinters.org/prints/53784-copal-compur-prontor-0-to-m58-lens-board-adapter M58-M58 17-31mm…
How cool would it be to make a stringed instrument entirely from PLA? Well now you can! For the backstory and more technical details see the second half of this description. After devising a way to make very strong thin strings from PLA…
First of all ONLY use this if you have an LED bulb in your lamp, as you do not want to enclose the het from a wire bulb, as it could result in the model melting or worse, so stay safe!! If you want to take some good photos of your prints…
The part that engages the film to rewind it on my Kodak Ektar H35N broke. This is a simple printable replacement. Print orientation I printed mine laying flat, because I was worried about the part being weak because of the layer line weak…
Graflex Lensboard for aero ektar 178mm f/2.5 Need 4x M4x10 screw recommend to use 6.6CNC in gy2025.com for lensboard and 3d printing for screw mount largeformat film
This is a very simple and easy to print lens cap for the Kodak Ektar H35! There are two variants, one adorned with Kodak's logo as well as a blank version! Simply print and install!
An easy to use slide on protector for your Kodak Ektar H35 :)
Intro A practical industrial-style brace designed to stabilize leaning and wobbling IKEA HEKTAR lamps. Features a wide reinforced base with structural ribs that prevent the lamp's pole from leaning and wobbling in any direction,…
This is a simple music stand designed to clip on to the back of a Nektar SE49 USB-MIDI controller, just above/behind the keyboard. You'll most likely want to print at least four of these; as you can see in the image, the most that will…
This bracket will allow you to hang an Ikea Hektar Lamp on a headboard approx. 35mm thick (that is the width of the opening). Requires 2 M4x10 socket head screws The tolerances are very tight on the screw holes, so I slid the bracket over…
Ceiling mount for the Ikea Hektar lamp. You still need the zip tie that comes with it. Read printing instructions below to ensure proper strenght! Print instructions Resolution: 0.2 Infill: 20% Notes: You must print this with: 6…
Designed to be printed in vase mode.
Allows you to use Color Filters for the Kodak 35mm camera when the flash is turned on. Included is a template to help you cut the color filters into shape as well as something to hold them. The template has a hole so that you can align it…
Use this small cover to avoid accidentally pressing your Kodak Ektar H35N's shutter button. Might also fit the regular H35 (not tested). Slide it on the corner where the shutter button is, and it should stay in place by friction. If you…
I've remixed this model so it fits normal nig tierips
I removed the original lamp holder and used the screw to attach the lamp to the mount.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4hriEmwUDbP The Base was produced in Fusion 360. I am just learning how to use it. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Made a stand for HomePod 2 that slides onto the top of a HEKTAR Ikea floor lamp with 3-spotlights. Great fit for a corner as it provides a perfect surface for the sound to bounce/reflect off. Printed on the wide side with supports. Used…
Quick model i threw together so that i can mount my ceiling light again. The mounting holes might be a bit off but everything does fit. I just wanted to cut on yet another iteration loop. The part is designed to be used with M3 threaded…
The 38cm IKEA Hektar is normally supposed to hang from the ceiling. It can however be mounted as an upwards projector for that nice retro, pseudo-industrial lamp look. This block holds the lamp upwards, and the original Onshape model can…
Using this adapter, you can utilize an IKEA MELODI pendant lamp with the IKEA HEKTAR floor lamp as a complete replacement for the shade. This will allow the lamp to diffuse some of the light around the shade and not just under it. I…
This is a diffuser for the Ikea Hektar pendant lamp (22 cm diameter). Fits tightly into the lamp. Can be printed in one part on the Core One. Print settings: White PETG, 0.2mm layer height, Ironing on the first layer Can't attest to heat…
A very very simple adapter to fit a Kodak Series 6 filter clamp onto and Ektar h35 or h35n. Pretty much any print settings will work. TPU might be better, but I haven't tested it.
I modeled these mounts for my Nektar Expression Pedals so they can be mounted to a pedalboard to the right of my Line6 Helix as exp 2 and exp 3. (mine are modified with shorter, more durable cables) I have variants of the front mount:…
The Kodak EKTAR H35 is a great little half-frame shooter, but it ships without a lens cap, which is kind of wild for a camera you're tossing in a bag. This is a simple snap-fit replacement that keeps your lens clean between rolls.…
This is a simple light diffuser for the 3-splotlight version of the Ikea Hektar floor lamp. I found the light from the exposed bulbs too harsh, this is meant to soften the light. No supports are needed. I printed these in PETG in case the…
A simple screw-in lens cap for Kodak Signet 35, to protect the excellent 44mm f/3.5 Kodak Ektar Lens. Available in 3 functionally identical variants: - Plain - with Period Correct logo - with Classic EKC logo Thread spec is M26.5x0.75…
Use this small cover to avoid accidentally pressing your Kodak Ektar H35N's shutter button. Might also fit the regular H35 (not tested). Slide it on the corner where the shutter button is, and it should stay in place by friction. If you…
The Kodak EKTAR H35 is a great little half-frame shooter, but it ships without a lens cap, which is kind of wild for a camera you're tossing in a bag. This is a simple snap-fit replacement that keeps your lens clean between rolls.…
It is basically the same as the thing:3329185, but I increased the space for my thicker Samsung S6 Lite and I also make it a bit longer and open at the top part. It can easily rest on the mount, no need to be clamped. The original design…
Printing: Filament: PETG/ABS Settings: Layer hight = 0.2mm Wallcount = 5 Support = No Infill = 15% Fastening Screw: min. 4x25mm ( Depends on the thickness of your tabletop!!! ) I assume it can be used for all devices from the same model…
Hallo Ich habe für die Ikea Hektar Hängelampe 22cm eine Abdeckung entworfen damit in meiner Garage nicht jedes Tierchen darin platz findet… In die Abdeckkappe kann ein Loch gemacht werden für das Anschlusskabel. Oder man nimmt die Version…
This is an adapter for the tall IKEA Hektar standing lamp (with E27 socket). It connects the base directly to the yoke that's holding the lampshade. I designed this so I can put my two lamps up on high shelves, and they won't take up…
mount with screw holes to mount your Nektar Impact LX49+ Midi Controller to desk or sth. print with PETG and high/100% infill for sturdiest and most playable results
!!!Do not forget to mirror small part!!! Print as the same way as it seen at the photos.
Build with the largest surface facing the print bed. I used my favourite material, PolyMaker's CoPA, which has great strength and temp resistance and yet easy to print. Definitely better than PLA, PETG, or even ABS/ASA.
Easy lamp stand for the Ikea Hektar Lamp. Its original screw can be used to mount the lamp. Einfacher Lampenständer für die Ikea Hektar Lampe. Die orginal schrauben können zum Befestigen benutzt werden,
Additional Material: 2x M4 screws Category: Organization
