1 / 3
Century Graphic Lens Board - Wollensak RAPAX / GRAPHEX No. 2 (2x3 Baby Graflex) — zdjęcie 1
1 / 3

Century Graphic Lens Board - Wollensak RAPAX / GRAPHEX No. 2 (2x3 Baby Graflex)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount a Wollensak RAPAX / GRAPHEX No. 2 Shutter a 2x3 Crown Graphic, Century Graphic or Baby Graphic.

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

A 3D-printable lens board for mounting a Wollensak RAPAX / GRAPHEX No. 2 Shutter  on a Century Graphic (Baby Graflex) / 2¼ × 3¼ Crown Graphic camera.

Manufactured by Wollensak in Rochester, this is the same shutter that is commonly encountered on 4x5 Crown Graphic, often equipped with Graphic Optar lenses or retrofitted with other exotic optics like Gorez Gold Rim Dagor.

Application Notes:
- Tested with PLA and PETG
- Print camera side up. 
- 0.20mm layer height.
- Use scarf joints and randomize seam positions.
- Avoid crossing perimeters.
- 15% Gyroid infill.
- Print in Black or Matte Black filament.
- Bellow draw. The baby graphic has a bellow draw of 7¾ inches, or about 196 mm.  That might limit the focal lengths you can actually use on this camera. 

Tagi