1 / 11
Four By Silk: A 1:6 Film-Grip 4x4 Frame Lamp — zdjęcie 1
1 / 11

Four By Silk: A 1:6 Film-Grip 4x4 Frame Lamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A functional, scale-model soft light inspired by professional film equipment

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Four By Silk is a working soft-light desk lamp designed as a 1:6 scale model of a film-grip 4x4 frame—the standard rag-and-rail diffusion frames used on film sets worldwide. Originally created as a fourth-anniversary gift (traditionally linen or silk) for nmy wife, a lighting technician.

Key Features

  • Accurate Scale Details: Features square-section rails, gusseted corner castings, and a fully tilting yoke mounted on a weighted base.

  • Assembled Dimensions: 225 x 243 x 123 mm.

  • No Glue Required: The main structure fastens entirely using standard M3 hardware and can be disassembled using a 2 mm hex key.

  • Customisable & Modular: Includes a recessed pocket on the top wall for a custom nameplate or plaque (101 x 16 x 1 mm pocket size).

Printer Requirements & Compatibility

Before printing, ensure your printer build volume can accommodate the larger components. Minimum required print bed size is 250 x 210 mm. Small-format machines with 180 x 180 mm build volumes (such as the Prusa MINI+ or Bambu A1 mini) can only fit the back panel and smaller caps.

Part Dimensions & Printer Fit Matrix

Part Name

Dimensions (mm)

Qty

180 mm Bed Fit

210+ mm Bed Fit

four_by_silk_frame

203 x 203 x 13

1

No

Yes (MK3S+, MK4S, P1S, etc.)

four_by_silk_body

219 x 203 x 85

1

No

Yes

four_by_silk_yoke

225 x 110 x 150

1

No

Yes

four_by_silk_back_panel

162 x 162 x 3

1

Yes

Yes

four_by_silk_diffuser

195 x 195 x 2

1

No

Yes

four_by_silk_pivot_cap_x2

16 x 16 x 5

2

Yes

Yes

four_by_silk_mount_cap_x4

10 x 10 x 5

4

Yes

Yes

four_by_silk_panel_cap_x2

12 x 12 x 5

2

Yes

Yes

four_by_silk_corner_knob_x4

4 x 4 x 8

4

Yes

Yes

four_by_silk_blank_plaque

101 x 16 x 5

1

Yes

Yes

Printing Guide & Materials

Filament & Material Options

  • Primary Filament (ASA or PETG): ASA is recommended for its strength and matte finish. If printing on an open-frame printer without an enclosure, PETG is more than fine (same for enclosed printers, really).

  • Color Considerations: The main lamp body must be printed in dark or black filament to prevent light bleed through the walls. Spray-painting the interior cavity white helps maximise forward light output.

Recommended Print Settings

  • Nozzle Size: 0.4 mm

  • Layer Height: 0.16 mm

  • Walls / Infill: 3 perimeter walls, 15% infill

  • Support & Brim Setup:

    • Body: Tree supports auto-generated (30° threshold). Turn "Don't support bridges" ON so internal tenon pockets and nut slots stay clear. Use an 8 mm brim.

    • Frame & Yoke: No supports required. Use a 6 mm brim.

    • Back Panel & Diffuser: No supports. Use a 12 mm brim for the back panel and an 8 mm brim for the diffuser.

Diffuser Options: 3D Printed vs. Acrylic Sheet

You can either 3D print the front diffusion panel or cut it from acrylic sheet stock. The maximum allowed sheet thickness is 2.88 mm (designed around standard 2.0 mm stock).

Feature

Option A: 3D Printed Diffuser

Option B: Cut Opal Acrylic

Material

White or Natural PETG/PLA

2 mm Extruded Opal Acrylic (~30% transmission)

Preparation

Print flat at 100% infill (prevents infill grid lines from showing when lit).

Score and snap 195 x 195 mm square, trim corners, and drill hole pattern.

Pros & Cons

No extra tools or raw materials needed; slightly lower light transmission.

Flawless optical quality, no layer lines, higher light output.

Hardware Requirements & Assembly Instructions

What you'll need to assemble it:

  • USB Puck Lamp: Standard ~59 mm diameter x 8 mm thick USB-powered puck light (5V / 3W warm white with inline switch recommended). Requires a detachable backplate with 28 mm screw pitch mounting holes.

  • Fasteners & Hardware:

    • 2x M3x12 mm screws (Yoke pivot points)

    • 10x M3x10 mm screws (4 frame mounts, 2 back panel, 4 diffuser corners)

    • 4x M3 nuts & select M3 washers

  • Optional Magnets: 2x (15 x 2 mm) neodymium magnets and 2 mild steel keeper discs for magnetic back panel closure.

Assembly Sequence

  1. 1. Drill Pilot Holes: Clean out pivot bores from 2.9 mm to 3.2 mm before installing captive nuts. Clean frame mount pilots from 2.8 mm down to 2.5 mm for direct M3 self-tapping.

  2. 2. Mount Body into Yoke: Gently flex the yoke arms over the body spigots until seated.

  3. 3. Install Pivots: Secure each side using an M3x12 mm screw into the captive nut inside the spigot, then press-fit the pivot caps.

  4. 4. Secure Diffuser: Seat the diffuser panel against the front rim and bolt through its four corners into the mouth corner bosses.

  5. 5. Attach Outer Frame: Insert the four frame tenons into the body pockets and tighten the M3x10 mm mounting screws to lock the frame in place.

Final Wiring & Back Panel

Mount the USB puck light to the back panel, run the USB cable through the notch, and fasten the back panel using M3 thumbscrews.

Tagi