Inline fan turbine for ventilation - 140mm fans, 100mm hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inline fan turbine fume extractor for 140mm fans, optimised for airflow and 100mm ducting compatibility.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 488
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of @MakerMike's inline fan for 3D printer enclosure ventilation, adapted for 140mm PC fans while retaining compatibility with standard 100mm / 4-inch ventilation ducting.
The original design uses two PC fans with a stator between them to provide strong airflow for extracting 3D-printing fumes and odours from an enclosure. This remix keeps the same basic concept while making several modifications specifically for 140mm fans.
Changes made in this remix:
Scaled the design to accommodate 140mm PC fans.
Optimised the outlet and stator cores to match the approximately 40mm diameter central hub of 140mm PC fans, reducing unnecessary restrictions to airflow.
Rebuilt the hose connectors while retaining compatibility with standard 100mm / 4-inch ventilation hoses.
Added alignment pins and corresponding holes to the parts that are glued together, making assembly easier and ensuring correct alignment.
Corrected the external geometry of the stator.
Removed the screw holes from the stator. The stator does not require screws for assembly, so removing them reduces print time and eliminates unnecessary features.
The original assembly concept remains unchanged: the outlet and case are glued together, while the inlet and case are secured with M4 bolts (16mm) and nyloc nuts. Make sure to orient the fans correctly, the sticker with text is on the backside of the fan and should be pointed towards the outlet of the turbine!
As with the original design, PETG is recommended for strength and longevity, and PLA is not recommended. No supports are required. For a strong and durable print, at least 5 walls and approximately 25% infill are recommended. The stator does not need strength and can be printed with 2 or 3 walls and just 8% infill to save some filament.
For best performance, use fans with high static pressure (radiator fans) instead of fans optimised for airflow (case fans). It will work just fine with case fans, but might be noisier.
This remix is intended specifically for use with 140mm PC fans and 100mm / 4-inch ducting.
Original design by @MakerMike. This model is a remix and builds upon the original design; please refer to the original model for the original design details, development process and research behind the ventilation system.