1 / 7
Razer Kishi V2 Vertical / Portrait Mode Phone Mount Adapter — zdjęcie 1
1 / 7

Razer Kishi V2 Vertical / Portrait Mode Phone Mount Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount your phone vertically (portrait mode) on Razer Kishi V2 using this adapter and a Type-C extension cable.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
44
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

Overview

This 3D-printed adapter allows you to mount your smartphone in vertical (portrait) mode to comfortably play portrait/vertical mobile games.

The adapter consists of a dummy phone base plate combined with an adjustable screw-clamp holder. While it was specifically designed and tested on the Razer Kishi V2, it may also be compatible with other Razer Kishi models that share a similar clamping form factor.

Cable Management & Cutouts

The base plate features built-in cutout holes/pass-through channels designed specifically for easy cable routing. This allows you to plug in your Type-C connector seamlessly without bending the cable or interfering with the controller's grip.

Hardware Required

To connect your phone to the controller while mounted vertically, you have two options depending on your controller model:

  1. Option 1 (Recommended / Tested): A 25 cm Type-C Male-to-Female extension cable to bridge the controller's built-in male USB-C port to your vertically placed phone.

  2. Option 2: A standard Type-C to Type-C (Male-to-Male) cable if your specific gamepad model supports direct controller data connection through its external charging/pass-through port.

(Optional) Small rubber/foam pads inside the clamp jaws for extra grip and scratch protection.

Print Settings

  • Material: PLA, PETG, or ABS

  • Layer Height: 0.20 mm

  • Infill: 20% – 30% (Gyroid recommended)

  • Perimeters/Walls: 3 or 4 walls for extra strength

  • Supports: Yes (on overhangs depending on your build plate orientation)

How to Use

  1. Extend your Razer Kishi and insert the adapter base plate into the grips.

  2. Route and plug your Type-C cable through the integrated cutouts.

  3. Place your smartphone vertically into the clamp and tighten the screw mechanism securely.

  4. Connect the other end of the cable to your phone.

Tagi