Razer Kishi V2 Vertical / Portrait Mode Phone Mount Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount your phone vertically (portrait mode) on Razer Kishi V2 using this adapter and a Type-C extension cable.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
Overview
This 3D-printed adapter allows you to mount your smartphone in vertical (portrait) mode to comfortably play portrait/vertical mobile games.
The adapter consists of a dummy phone base plate combined with an adjustable screw-clamp holder. While it was specifically designed and tested on the Razer Kishi V2, it may also be compatible with other Razer Kishi models that share a similar clamping form factor.
Cable Management & Cutouts
The base plate features built-in cutout holes/pass-through channels designed specifically for easy cable routing. This allows you to plug in your Type-C connector seamlessly without bending the cable or interfering with the controller's grip.
Hardware Required
To connect your phone to the controller while mounted vertically, you have two options depending on your controller model:
Option 1 (Recommended / Tested): A 25 cm Type-C Male-to-Female extension cable to bridge the controller's built-in male USB-C port to your vertically placed phone.
Option 2: A standard Type-C to Type-C (Male-to-Male) cable if your specific gamepad model supports direct controller data connection through its external charging/pass-through port.
(Optional) Small rubber/foam pads inside the clamp jaws for extra grip and scratch protection.
Print Settings
Material: PLA, PETG, or ABS
Layer Height: 0.20 mm
Infill: 20% – 30% (Gyroid recommended)
Perimeters/Walls: 3 or 4 walls for extra strength
Supports: Yes (on overhangs depending on your build plate orientation)
How to Use
Extend your Razer Kishi and insert the adapter base plate into the grips.
Route and plug your Type-C cable through the integrated cutouts.
Place your smartphone vertically into the clamp and tighten the screw mechanism securely.
Connect the other end of the cable to your phone.
