Multiple Gearing - Fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fidget based on No.: 027 "Multiple Gearing" from the 507 mechanical movements book.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This pretty cool fidget shows how a turning gear can be made with straight paths!
Inspiration
It is inspired on No.: 027 "Multiple Gearing" from the 507 mechanical movements book.
https://507movements.com/mm_027.html
A nice educational animation (not made by myself) of the movement can be seen here:
Printing
Printing is straightforward. Except for the "holder_part1" that needs 5 perimeters to be fully solid, this will make the pins stronger. Also, if you increase the infill of the disk you can give it a bit more weight and make it turn better.
Material: PLA
Layer height: 0.15 mm
Infill: 30% (but you can go higher for extra weight)
Supports: Not required
Assembly
For the assembly, make sure the 3 pins are not centred on the disk, they need to be near an edge. Also, there are two option for the holder part 2, one might require glue or a strong force to insert (depending on your material), if it doesn't work for you try the self compliant version.