SAB ILGoblin 520 Pro antenna holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps your (ELRS) antenna wires safe in an aesthetically pleasing way.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 48
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original antenna holder that comes with the ILGoblin 520 Pro is a bit strange and it didn't fit well with my FBL (Nexus-XR) in the default orientation. I had seen other solutions with SAB heli's but couldn't find one that works worked for me, so I decided to have it custom made.
I think the result looks nice and clean, does not interfere with the battery tray or the canopy. It attaches to the frame using the existing holes and a 2.5x6 mm self tapping screw.
Printed in PETG on core-one, 0.2 mm balanced profile, you have to mirror the part to get the other side. I designed the support (20mm circle) at the end of the tube so it stays straight during printing, it can be trimmed easily after completion. Not other supports needed.