Couch Neck and Trap Arch — Lying Neck and Shoulder Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A full arch that carries the head while the upper traps drape over the crest
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
Couch Neck and Trap Arch
A full arch that carries the head while the upper traps drape over the crest. The neck is supported rather than working, which is the difference between a release and a held position.
TARGET AREA: cervical spine, upper traps
SPECS
- Size: 195 x 181 x 98 mm
- Material: 1287.2 cm3
- Solid-core print: it does not compress, so the pressure you set is the pressure you get.
PRINT SETTINGS
- 0.2 mm layers, 3 walls, 20-25% gyroid infill
- No supports
- Any rigid filament
Original design. Every dimension comes from the anatomy of the target tissue and a contact-pressure model (p = F / A), not from what looked good in CAD.
NOT A MEDICAL DEVICE. This is a self-care tool. If something hurts sharply, numbs, or refers pain down a limb, stop.
THE REST OF THE LINE This is one of 100 M2 mobility tools - peanuts, wedges, rollers, hooks, scrapers and full-length couch supports, each one sized from the anatomy of a specific tissue. All of them, free: https://www.printables.com/@Mamoo85_4976067
NO PRINTER? A selection of these tools, printed solid and shipped: https://mattmichelstraining.com/myoworks?s=pr