One Gallon Jug Spout for Auto Detailing Liquids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple spout to help dispense 1-gallon bulk bottles into smaller spray bottles.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple two-part spout I designed to make pouring from the 1-gallon bulk bottles to smaller bottles a bit easier. I used a two-part design to allow the spout to rotate to the correct orientation for pouring. Assembly is as simple as sliding the threaded collar over the spout, give the collar a few turns as it gets to the base of the spout, and that's it. The threads should keep the collar retained.
Recommended print settings:
PETG preferred, but PLA will work (PLA will have less chemical resistance)
Supports not needed!
0.2mm layer height, to ensure threads function
Print with the base of the spout down, and the threaded side of the nut face up
The thread of the bottle nut is 30-SP400 for reference. This may fit other bottles besides auto detailing gallon jugs.
Take a look at my other models to see the iK Multi bottle funnel I made as well, which is another tool I designed to make refilling bottles easier.