1 / 3
One Gallon Jug Spout for Auto Detailing Liquids — image 1
1 / 3

One Gallon Jug Spout for Auto Detailing Liquids

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple spout to help dispense 1-gallon bulk bottles into smaller spray bottles.

Rating
0 / 5
Likes
2
Downloads
18
Makes
0
Views
54
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Simple two-part spout I designed to make pouring from the 1-gallon bulk bottles to smaller bottles a bit easier. I used a two-part design to allow the spout to rotate to the correct orientation for pouring. Assembly is as simple as sliding the threaded collar over the spout, give the collar a few turns as it gets to the base of the spout, and that's it. The threads should keep the collar retained.

Recommended print settings:

  • PETG preferred, but PLA will work (PLA will have less chemical resistance)

  • Supports not needed!

  • 0.2mm layer height, to ensure threads function

  • Print with the base of the spout down, and the threaded side of the nut face up

The thread of the bottle nut is 30-SP400 for reference. This may fit other bottles besides auto detailing gallon jugs.

Take a look at my other models to see the iK Multi bottle funnel I made as well, which is another tool I designed to make refilling bottles easier.

Tags