Bosch RA1181 Router Table vacuum attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collects dust pushed to the end of the router table. Designed to fit existing mounting holes in the RA1181 Router table
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When using a router table most of the sawdust is pushed toward the end of the router table -- even if you have an under-bit dust collector.
This vacuum attachment is a chute that fits existing Bosch RA1181 router table mount-points. The vacuum attachment has a pivoting flap that can be raised to provide a sawdust shield. As you push the stock toward the chute, the stock pushes the flap over and out of the way.
Printed the attachment components in PETG for durability. 4 walls, 18% Gyroid infill.
Instead of slicer generated supports, I designed-in supports using CAD. The supports break away more cleanly and require quite a bit less material than slicer generated supports. (Accomplishing this was something of a science project. Learned a lot.)
You need to print 1 chute, 1 flap, and 2 links. Press fit. You do need two 1/4-20 bolts and wing-nuts to secure the attachment to the router table.