Bosch RA1181 Router Table vacuum attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Collects dust pushed to the end of the router table. Designed to fit existing mounting holes in the RA1181 Router table
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When using a router table most of the sawdust is pushed toward the end of the router table -- even if you have an under-bit dust collector.
This vacuum attachment is a chute that fits existing Bosch RA1181 router table mount-points. The vacuum attachment has a pivoting flap that can be raised to provide a sawdust shield. As you push the stock toward the chute, the stock pushes the flap over and out of the way.
Printed the attachment components in PETG for durability. 4 walls, 18% Gyroid infill.
Instead of slicer generated supports, I designed-in supports using CAD. The supports break away more cleanly and require quite a bit less material than slicer generated supports. (Accomplishing this was something of a science project. Learned a lot.)
You need to print 1 chute, 1 flap, and 2 links. Press fit. You do need two 1/4-20 bolts and wing-nuts to secure the attachment to the router table.