T-Stack Dewalt Pro Organizer (DWST14925/DWST14825) - Separators
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SEPARATORS for T-Stack Dewalt 10 Compartment Organizers w/ the metal clasps DWST14925 (2.9") and DWST14825 (4.5")
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
I have a few T-Stack Dewalt Pro 10 Compartments Organizers 2.9" deep DWST14925 (shallow ones) and found Jduzz (@Jduzz_214493) models! Love them! Then I changed the dimensions and adjusted the separators to fit also the 4.5" DWST14825 T-Stack Pro (deep ones).
I printed a few but when I came to close the lids, it would not close and the separators were too tight and rounded on the "rings". The corners on this T-Stack models have small bevelled triangles to keep the trays at their place! So I used my dremel to cut the corners of the rings and my deburring tool to rounded the separator edges so I could used them!
Then went into OnShape to modify and create what I needed! (You have to check out that program... worth the time!!)
I created bevelled corners so the lids would close
I squared the holes in the rings and made them 0.1mm wider -- still fit very snug and does not move (I could not use the separators before... too tight!) I really like the snug fit! a
Then I also changed the size to fit the Deep T-Stack Dewalt Pro 10 Compartments Organizer separators also!
Cheers! ; )