Rings for a DIY shroud - Sky-Watcher 200P Flextube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rings for a DIY shroud - Sky-Watcher 200P Flextube
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These rings keep a home-made shroud in shape and prevent it from sagging into the optical path of a Sky-Watcher 200P Flextube Dobsonian truss telescope.
Testing showed that a single ring is not enough to hold the shroud's shape reliably — use two rings per shroud.
You will need per set (2 rings = 8 parts total):
8× M3 nuts
8× M3×25 flat-head (countersunk) bolts
Shroud fabric notes (not included, for reference):
Made from double-layer blackout fabric with a simple pattern:
Length: 44 cm (+ extra allowance for the drawstring channels/casings)
Width: 100 cm
Velcro strip along the seam
Loops sewn on the inside for attaching the rings
