1 / 5
Rings for a DIY shroud - Sky-Watcher 200P Flextube — image 1
1 / 5

Rings for a DIY shroud - Sky-Watcher 200P Flextube

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Rings for a DIY shroud - Sky-Watcher 200P Flextube

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
41
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

These rings keep a home-made shroud in shape and prevent it from sagging into the optical path of a Sky-Watcher 200P Flextube Dobsonian truss telescope.

Testing showed that a single ring is not enough to hold the shroud's shape reliably — use two rings per shroud.

You will need per set (2 rings = 8 parts total):

8× M3 nuts
8× M3×25 flat-head (countersunk) bolts

Shroud fabric notes (not included, for reference):
Made from double-layer blackout fabric with a simple pattern:

Length: 44 cm (+ extra allowance for the drawstring channels/casings)
Width: 100 cm
Velcro strip along the seam
Loops sewn on the inside for attaching the rings

Tags