77 models
Quick Release Plate Spare Part Is plastic enough for your expensive camera? Well, a metal plate certainly is unbeatable. But my PLA print never failed! For studio and indoor it does the job! You will need a round rubber band to fit the…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
A mount to allow an ATX PSU to be used in the NR200P case. This holds the power supply at the front of the case in front of the graphics card with space to allow the front panel IO cables through. It's based on the one you can download…
Print approx. €5.52–€6.74 excl. taxPreliminary estimate for one variant
Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . The design of the bracket is ventilated for actively cooled units to be installed, independently from the orientation of the intake fan. The bracket is also compatible…
Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . We are making free to print and modify the design for the clips that hold the paneling of our most beloved ITX enclosure(s)! Lost one? Your product is out of warranty?…
Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . We are making free to download, remix and modify the design of the top panel of our most beloved ITX enclosure(s)! You can easily modify it to add support for a…
I've designed a compact gobo projector that is compatible with Godox V1, AD100 PRO, AD200 PRO flash with the H200R round head. I needed something portable when I'm On-Location. No supports needed if printed like shown on the pictures. I…
3 shell, iron the top surface for better look. Very easy to print.
Making spare parts is fun and rewarding. I made this part since i needed it, I remember i've found similar parts before, but none seems to fit my old tripod. I hope you enjoy it! Measurements: width: 52.4mm (2.06") Depth(largest): 42.7mm…
During the development of the Cooler Master MasterBox NR200P , we created several variants for the case feet design. Following numerous iterations, the launch design was chosen, but we thought "why not share the iterations with our…
Poignée grip pour Canon EOS R7, rajoute 16mm a la hauteur idéal pour les grande mains, permet une meilleur prise en main du boitier. Pour sortir la batterie malheureusement faut le dévisser, mais comme on peut le charger via USB-C c'est…
200PL and 410PL quick plate compatible design. Now with 375PL model. You can get any length if youn use the OpenSCAD file. Print upside down, no support needed. All holes are tailored for M3 internal hex head screw.
Wanted a bit more airflow for my NR200p dual rad water-cooled setup so cut out some of the excess behind the front panel and replaced it with this. Its a big model, just about filled the bed on my Voron 2.4's 30cm build plate. Needs 8 M3…
Frame will give you another 9mm of width. Frame V2.0 (TG and metal and radiator mount compatible) 7-part print. Radiator spacings fixed, they are now precise. Also made holes 4mm big to accomodate Deson m3 screw inserts in radiator mount…
During the development of the Cooler Master MasterBox NR200P , we created several variants for the case feet design. Following numerous iterations, the launch design was chosen, but we thought "why not share the iterations with our…
"A mount to allow an ATX PSU to be used in the NR200P case. This holds the power supply at the front of the case in front of the graphics card with space to allow the front panel IO cables through. It's based on the one you can download…
Designed to mount an NZXT Kraken X63 (280mm AIO) on top of the NR200P. Glass and Mesh-Panels still can be used, also standard top cover fits perfectly in. All Connectors should be printed with PETG with min. 25% infill. Material of…
This is a basic implementation of the 200PL tripod quick release plate used by a wide range of Manfrotto tripods, complete with FreeCAD source, for adaptation projects. There are lots of 200PL plate STLs out there, why another? Mostly…
This is a 3d printable back panel made for the Cooler Master NR200P to allow for a vertical-mounted GPU and a top-mounted AIO. The printed mod changes the position of the motherboard down 26.5mm, GPU down ~63.5mm, and moves the internal…
During the development of the Cooler Master MasterBox NR200P , we created several variants for the case feet design. Following numerous iterations, the launch design was chosen, but we thought "why not share the iterations with our…
During the development of the Cooler Master MasterBox NR200P , we created several variants for the case feet design. Following numerous iterations, the launch design was chosen, but we thought "why not share the iterations with our…
uick Release Plate Camera Mounting Plate for Manfrotto 200PL-14, 1/4 Inch Screw Hole
A bracket for HP EliteDesk 800 G3 SFF motherboard for mounting in Cooler Master NR200 NR200P cases. It's likely you can also use it for mounting inside other mATX and ATX cases but I have not tried it myself. This is a low effort model,…
Tapa trasera para Skywatcher 200PDS / Rear cover for Skywatcher 200PDS Spanish : He diseñado este conjunto de piezas para la parte posterior de mi skywatcher 1000/200PDs con tres objetivos: 1- Evitar la entrada de luz posterior. Aunque mi…
During the development of the Cooler Master MasterBox NR200P , we created several variants for the case feet design. Following numerous iterations, the launch design was chosen, but we thought "why not share the iterations with our…
Print in PETG as you will run into reliability issues with PLA.
While an excellent telescope that has upped my astrophotography game, the Sky Watcher Quattro 200P is starkly open on the back side near the primary mirror ( similar to an issue near the focuser tube ). In fact, most of the back is just…
I took DROUGA's design and simply added 10mm to the height so that standard 25mm fans will fit. Category: Computer
Bracket to mount an ATX power supply in the Coolermaster NR200/NR200P. This only works if you have already inverted the case. The two “pegs” slide in under the little sheet metal edge in the front, and the bracket then screws to the…
During the development of the Cooler Master MasterBox NR200P , we created several variants for the case feet design. Following numerous iterations, the launch design was chosen, but we thought "why not share the iterations with our…
A 10mm shortened version from Zocazol. Slightly beveled + reduced hole for better fixing of the side. I did this for my Noctua D15 which fits just right. The lower extension brackets are not needed, stick to the original bracket. If you…
Much like my other model for blocking light leaks near the primary , this model is to address the area around the focuser where it is very easy for light to get to the camera sensor. The black ring that holds the set screws for the 2"…
In NR200P v2 case by default you can use sfx and sfx-l standards power supply. As you could imagine going in smaller dimensions standards is quite a bit more expensive than standard atx. However the amount of space in the case itself is…
Intended to be used for Cooler Master NR200P bottom exhaust, it guides hot air to exhaust to one side of the case, so it doesn't heat up my hands and keyboard. I printed this with PETG filament, as the exhaust can get quite hot. Not sure…
Made this for my Celestron Nature DX ED 10x50mm roof binoculars. It was modeled to be similar to the Celestron Binocular Tripod Adapter (https://www.celestron.com/products/binocular-tripod-adapter) so it might fit Celestron’s other porro…
The “--clear” version does not contain additional surface for better adhesion during print.
So I decided to transplant my old loop with an EKWB A240G aluminium loop into an NR200p. Seeing how it is recommended to have a EK-XRES 100 SPC-60 MX PWM (incl. pump) in the vertical orientation (according to the manual). I decided to…
Direct replacement for the stock front panel clip
This is a connector for a Manfrotto 200PL tripod head to an Arcaswiss clamp WITH ARCASWISS MALE DOVETAIL IN THE BACK. It was made with in mind the use of a simple tripod head like 128RC and a camera that's just been removed from a modern…
Backplate to be used with my motherboard offset plate. I recommended printing it with some higher temp resistant filament like PETG. I've used orange Prusament PETG. I personally have RX6400 GPU so there is an additional cutout for…
I made this simple handle to carry my SAMA IM01. It utilizes the back 80mm fan mount UPDATE 10/8/2024: After many month of lugging my PC to and fro, the handle still held up very good . Ultimately , I went with 40mm M5 screw with 2 thick…
x2 usb 2.0 breakout, x1 usb fingerprint sensor, x1 usb to usb c adapter, x1 Apple usb c DAC. The fingerprint sensor is easier to reach if the pc is on the desk top. Also Apple's cheap usb c DAC have great audio and the ADC is way better…
Customize your Cooler Master NR200P with feet that like the Apple Mac G5 or classic Mac Pro !!
Cache arrière pour Newton Sky-Watcher 200PDS Ce cache permet de protéger le miroir primaire des lumières parasites pouvant pénétrer par l’arrière du télescope. Il préserve également l'accès aux vis de collimation , évitant tout contact…
A bracket for mounting HP EliteDesk 800 G3 power supply inside CoolerMaster NR200/NR200P case. I don't know if this is the best placement for the PSU but I wanted to get it done as quick as possible so I took 2 models and remixed them.…
This is a remix of the A & B clamps from the Modular Mounting System to use phones with thicker cases. Thingiverse does not accept remix links for some reason, so I list it here. This is a remix of the A & B phone clamps from:…
This is meant to fit on top of a Cooler Master NR200P desktop computer case. Printed on Bambu P1S with 0.4 noz and 0.28 layers. No supports needed. I used PetG to withstand the temps of my computer exhaust, but PLA+ would probably be…
Adapter to use a 240mm Water Cooler on the top panel and keeping the fans in their original position. I couldn't find any adapter that would keep all the original case parts and still close the glass panel. With this adapter, I moved the…
My first attempt at a quick side handle (designed in Tinkercad) to fit an M10 bolt head. Then can screw into the side of the Skywatcher 200p dobsonian telescope. May need to size up/down by 1-2% scale depending on what printer you have.
Have you been wanting to spice up your Cooler Master NR200(P) with some of the cool Phanteks LED's everyone's using, but the adhesive backing and “universal” brackets not doing the job like they should and constantly sagging down? Well me…
I created a 3.5 inch LCD Mount for my NR200/NR200P case that also holds a controller. Get your 3.5 inch LCD from AliExpress or similar sites. Example: https://www.aliexpress.us/item/3256804667574432.html
I have an old Manfrotto Tripod which I couldn't find suitable phone mount for it, so I made one.
This is a replacement handle meant for the Sky-Watcher 200p/200p Flex Tube Dobsonian. It requires an M10 bolt of 100mm length (M10x100) to function. While a smaller bolt would work fine I opted for a long one to add a solid core to the…
Has clearance to open the battery bay for the Canon m50/mkII.
A set of brackets used to mount 4 3.5" HDDs inside NR200 case. They mount to the side panel 5 screws. I believe the screws are M5 diameter, 10mm long. HDDs mount with standard hardware.
Came up with the idea to make a disposable rupture valve for pressure systems when testing. You can vary the failure point by increasing and decreasing the top surface thickness. You will have to dial it in and do some math to get the…
This Bahtinov mask is specifically designed to fit the off-axis aperture hole found on the Sky-Watcher 200P Dobson dust cover. It provides a compact alternative to full-aperture masks for achieving focus on bright celestial targets.…
U-Shaped Feet for the NR200/P originally created by Erer2001. I have increased the overall feet height to 3.5cm and increase the thickness in order to strengthen it due to being higher.
Simple design to maximize air around the power adapter, I printed mine in Blue translucent Esun Petg on a .4 nozzle with 30 percent infill.
A simple plate designed to protect your power button from undesired presses. It hooks into the two USB-A ports and has chamfers on the sides to make it easy to lift out. My one-year-old loves walking and pushing buttons. Unfortunately,…
Overview A primary mirror cover featuring a 92 mm fan mount for the Sky-Watcher 200p (200 mm) Dobsonian telescope. Features: 92 mm Fan Mount: Enables fast mirror cooling to ambient temperatures. Designed for use with a USB adapter for fan…
I recently use Manfrotto-Quick-Release-Adapter for the 200PL plates on my Glidecam and various Tripods. But the adapter doesn't fit on a plane surface because the fixing screw sticks out about 2.5mm. Therefor i created this spacer to put…
NR200P V3 Top Shroud (6" Duct) I designed this top shroud for the Cooler Master NR200P V3 due to finding how much heat it generates with a setup of a 5090 and a Ryzen 9 9950X3D! Now with this shroud connected to a 6" duct exhaust with a…
English I purchased a new TS-optics focuser for my skywatcher 200PDS, but when I installed it I found that it required 4 new holes positioned with precision and that the focuser would not completely cover the hole in the tube so there…
Rear cooling fan mount for a Sky-Watcher Flextube 200P telescope tube with no factory rear ventilation. Holds an 120x120mm fan (tested with Arctic F12 PWM PST) behind the primary mirror, mounted on silicone anti-vibration dampers to keep…
Simple replacement battery cover the the Godox AD200 and 200 Pro, Will also work on the Pixapro version as hey are the same product. This should work in and filament. I used PLA
I thought I'd make this for a quicker and easier transition from the original stand and the Manfrotto 200PL plate tripod. I added a space for a 10x3mm magnet, but it's not as strong as the original. It works well for me
These rings keep a home-made shroud in shape and prevent it from sagging into the optical path of a Sky-Watcher 200P Flextube Dobsonian truss telescope. Testing showed that a single ring is not enough to hold the shroud's shape reliably —…
vivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200promin…
A solid remix of the NR200 top bezel for builds that don't use the metal mesh panel. Changes from the original: - All honeycomb cells are closed, including the shallow decorative ones - The 18 slots for the mesh tabs are closed - The…
Quick remix to help fit my 9060 XT without rubbing, specifically the Sappphire PULSE AMD Radeon RX 9060 XT OC 16GB GPU
Внимание! Мне оказалась высоковата. Ужать до 15мм и должна сесть идеально. Поддерживает видеокарту и убирает горячий воздух. Печатал PLA
I have an old Manfrotto Tripod which I couldn't find suitable phone mount for it, so I made one.
vivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200prominivivox200promin…
"A mount to allow an ATX PSU to be used in the NR200P case. This holds the power supply at the front of the case in front of the graphics card with space to allow the front panel IO cables through. It's based on the one you can download…
The OT Design Engineering NR200 Vertical Stand! This product is designed to securely hold and display your Cooler Master MasterBox NR200 / NR200P Computer Case in the vertical position on any surface, giving your PC the attention (and…
