Sky-Watcher 200P Bahtinov Focus Mask (Small)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bahtinovmask for the dust cover of the Sky-Watcher 200P Dobsonian telescope (57 mm diameter cover) for precise focus.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 113
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Public Domain
This Bahtinov mask is specifically designed to fit the off-axis aperture hole found on the Sky-Watcher 200P Dobson dust cover. It provides a compact alternative to full-aperture masks for achieving focus on bright celestial targets.
Because it is a much smaller diameter than the full mrirror, the focus can only be done on bright objects and is therefore a bit less precise than doing the focus with a mirror-sized Bahtinov filter. However, it is a convenient accessory to have.
To adapt it to any telescope, directly in your slicer, scale by a factor: <precise_outer_diameter_of_the_hole in_mm>/57.
Note: this file has the proportion to fit over 50-70mm cap. It might start look off or be difficult to print if you go much outside this range.
This print requires a good first layer because of the complex geometry. Print the first layer slower than usual if necessary.