Solid Top Bezel for Cooler Master NR200 / NR200P (No Honeycomb, No Mesh)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Solid NR200 top bezel without honeycomb or mesh slots. Whole and two-part versions for 250 mm beds
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 4
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A solid remix of the NR200 top bezel for builds that don't use the metal mesh panel.
Changes from the original:
- All honeycomb cells are closed, including the shallow decorative ones
- The 18 slots for the mesh tabs are closed
- The perimeter groove for the mesh edge is filled
- Fan openings, fan screw holes, button cutouts and clips are unchanged
Files:
- WHOLE: one piece, 362.25 x 185 x 21.15 mm
- LEFT + RIGHT: two halves for 250 x 250 mm beds (195 x 185 mm and 179.25 x 185 mm)
Gluing the two-part version:
The left half has two tongues that fit into pockets in the right half, which helps with alignment and adds glue area. Dry-fit first and lightly sand the tongues if they are tight.
Print notes:
Files are oriented with the visible face up. Supports are needed under the part; tree supports work best. Use a layer height of 0.2 mm or less, as the tongues are only about 1.2 mm thick.
Note: with the honeycomb closed, air can only pass through the fan openings. Check your temperatures after installation.