Solid Top Bezel for Cooler Master NR200 / NR200P (No Honeycomb, No Mesh)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solid NR200 top bezel without honeycomb or mesh slots. Whole and two-part versions for 250 mm beds
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 2
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A solid remix of the NR200 top bezel for builds that don't use the metal mesh panel.
Changes from the original:
- All honeycomb cells are closed, including the shallow decorative ones
- The 18 slots for the mesh tabs are closed
- The perimeter groove for the mesh edge is filled
- Fan openings, fan screw holes, button cutouts and clips are unchanged
Files:
- WHOLE: one piece, 362.25 x 185 x 21.15 mm
- LEFT + RIGHT: two halves for 250 x 250 mm beds (195 x 185 mm and 179.25 x 185 mm)
Gluing the two-part version:
The left half has two tongues that fit into pockets in the right half, which helps with alignment and adds glue area. Dry-fit first and lightly sand the tongues if they are tight.
Print notes:
Files are oriented with the visible face up. Supports are needed under the part; tree supports work best. Use a layer height of 0.2 mm or less, as the tongues are only about 1.2 mm thick.
Note: with the honeycomb closed, air can only pass through the fan openings. Check your temperatures after installation.