Replacement Bicycle Light Mount for old Cytec?? front lamp.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model provides a replacement Cytec/Noname lamp holder for a 32mm handle bar. Cable tie mount and with release mechanism
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Front lamp mount to, who would have thought, hold a battery front light at a bicycle.
It can be easily mounted to a 32mm handle bar with a 9-11mm wide cable tie. To improve the friction between lamp mount and handle bar add a piece of 20mm wide nano tape or similar.
The snapping mechanism works also with PLA. If it doesn't last in daily use I'll reprint in PETG though.
Print parameters I used:
Layer height: 0.15mm Structural
PLA (choose PETG for better temp resistance and strenght)
Organic Support only on the bed
No brim
20% infill
3 perimeters
Parameter of the mounting mechanism are:
width of the small portion 10mm
width of the wide T portion 13.7mm
heigth of the channel 3mm
heigth of the upper edge 1.5mm
length snaphook to end 39mm