Replacement Bicycle Light Mount for old Cytec?? front lamp.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model provides a replacement Cytec/Noname lamp holder for a 32mm handle bar. Cable tie mount and with release mechanism
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Front lamp mount to, who would have thought, hold a battery front light at a bicycle.
It can be easily mounted to a 32mm handle bar with a 9-11mm wide cable tie. To improve the friction between lamp mount and handle bar add a piece of 20mm wide nano tape or similar.
The snapping mechanism works also with PLA. If it doesn't last in daily use I'll reprint in PETG though.
Print parameters I used:
Layer height: 0.15mm Structural
PLA (choose PETG for better temp resistance and strenght)
Organic Support only on the bed
No brim
20% infill
3 perimeters
Parameter of the mounting mechanism are:
width of the small portion 10mm
width of the wide T portion 13.7mm
heigth of the channel 3mm
heigth of the upper edge 1.5mm
length snaphook to end 39mm