Creality Ender 3 V2 - Clean Shroud 2.0 (40x20mm Hot-End Fan, 4010 Blower Fan)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This replaces the original Shroud For 40x20mm Hot-End Fan and the stock 4010 Blower Fan! I made a new version of my…
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 506
- Wydruki
- 4
- Wyświetlenia
- 3117
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This replaces the original Shroud
For 40x20mm Hot-End Fan and the stock 4010 Blower Fan!
I made a new version of my "Clean Shroud" that holds a 40x20mm Hot-End Fan and the stock 4010 Blower Fan (with its mounting) for Creality Ender-3 V2.
You can still use the original screws, but you will have to heat one screw up with a lighter and gently screw in it in the hole, this will thred the hole. Then gently screw it out and let everything cool off.
- Print the Fan Grill with the Creality-logo faceing up!
- Print the Shroud so you have the open side up, and the front side down. Use supports (10% Zig-Zag)!
- Fasten the Cover to the Shroud with double sided tape, after you mounted the 40x20mm fan.
Happy Printing!
Print Settings
Printer:
Creality Ender 3 V2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.12
Infill:
100
Filament:
Any PETG, ABS, PLA
Any
Category: 3D Printer Parts