1 / 9
PSU Cover For Ender-3 V2 - Noctua NF-B9 Redux (92x25 mm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of TremorRs "Ender 3 V2 PSU Cover Noctua Fan Remix". I made an alternative design for the Main PSU…
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 1034
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (24)Powiązane
This is a remix of TremorRs "Ender 3 V2 PSU Cover Noctua Fan Remix". I made an alternative design for the Main PSU Shroud and the Fan Housing.
You have to glue the parts together, just as in TremorRs design.
- Print the Main PSU Shroud flat on the bed, with support. Try 10% Zig-Zag.
- Print the Fan Housning flat on the bet, with support. Try 10% Zig-Zag.
- Print the Cable Holder standing up (the side with holes, down), with support. Try 10% Zig-Zag.
You must raise the printer for this to work. I use 38mm feets.
- Update 2022-01-27! Now the Fan Housing dropps in the Main Housing.
I hope you like it!
Print Settings
Printer:
Creality Ender-3 V2
Supports:
Yes
Resolution:
0.16 - 0.2
Infill:
30 - 100
Filament: Any Any Any
Category: 3D Printer Parts