Cord Lock for 550 Paracord
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very strong cord lock with multiple sizes available.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Very strong cord lock with multiple sizes available for various diameter cord. Specifically designed for 550 paracord.
The cord is compressed between two threaded pieces which are then locked together by an outer nut. Everything can be hand tightened with no tools, but a little oil on the threads is recommended for easier operation. The threads are custom designed for 3d printing but quality can vary between printers.
Paracord can vary in diameter between manufacturers so some trial and error may be needed to get the right model. The model diameters range from 3.6mm to 4.4mm. A proper fit will hold the paracord very tightly in place. If you want a more adjustable fit you can go one size up and the cord should be held tightly while still being able to be moved.
PLEASE NOTE!!! The parts for the different sizes are not interchangeable! The overall diameter changes between sizes, so the parts will not thread together properly if you try to mix and match. The CAD model is parametric to keep the size as small as possible while allowing for varying cord sizes.
Printing:
This prints well in PLA with a 0.4mm nozzle, 0.2mm layers and no supports. I've included .step files of the assembled part so you will likely need to split it into individual objects to print.