1 / 3
RS Watanabe 8-Spoke Custom 1/10 RC Drift Wheels (Fully Remodeled STEP/CAD Included) — zdjęcie 1
1 / 3

RS Watanabe 8-Spoke Custom 1/10 RC Drift Wheels (Fully Remodeled STEP/CAD Included)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Accurately scaled RS Watanabe 8-spoke wheels for 1/10 RC drift and touring cars. Remodeled in CAD from real-world GrabCA

Ocena
0 / 5
Polubienia
6
Pobrania
37
Wydruki
0
Wyświetlenia
153
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A complete ground-up remodel of the legendary RS Watanabe 8-spoke wheels, specifically adapted for 1/10 scale RC drift and touring chassis.

Instead of simply scaling down a 3D scan or mesh (which leads to paper-thin structures and stripped drive hexes), this model was built in CAD using real-world rim geometry as a reference.

FEATURES:

- Reinforced 12mm Drive Hex: Built to handle high-torque brushless setups without stripping.

- Scale Realism: Correct spoke curvature, lip depth, and proportions for an authentic JDM look.

- Durable Wall Thickness: Engineered for FDM printing without sacrificing structural strength.

- Open Source: Full CAD source files (.STEP) are included so you can tweak the offset, width, or hex depth for your custom suspension geometry.

PRINTING RECOMMENDATIONS:

- Material: PETG or ABS/ASA (for high durability and impact resistance)

- Layer Height: 0.12mm – 0.16mm

- Infill: 30% - 100%

- Supports: Minimal supports required depending on the lip depth and orientation.

Tagi