1 / 9
Craftsman 1/2 Drive Socket Holders — zdjęcie 1
1 / 9

Craftsman 1/2 Drive Socket Holders

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holds all your Craftsman sockets in organized slots

Ocena
0 / 5
Polubienia
2
Pobrania
2
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

I made a bunch of socket set holders for 1/2, 3/8, and 1/4.  These sets are based on the craftsman sockets.

 

Sizes Included in ½ Drive Set:

Metric- 15mm-27mm

Standard- 5/8, 11/16, ¾, 3/16, 7/8, 15/16, 1", 1" 1/16, 1" 1/8, 1" 1/4

 

I personally used three different colors to distinguish ½, 3/8, and ¼, and used color-coded latches to distinguish between Metric and Standard Socket sets.  I also added a different latch for 12-point sockets to further contrast with the normal 6-point sockets.  The boxes only need two latches per box, so don't print all four that are included in the 3MF files (unless needed).  I recommend 5-10% infill and no supports for the best results.  I used some brass stock for the hinges (2.4mm rods).  A 2.4-2.6mm screw or rod should work too.  I used a fine-point Sharpie for the black lettering, but if you have a printer with multicolor printing, you can use that.   

 

Sizes Of Boxes:

Metric- 180mm by 143mm by 51.8mm 

Standard- 205mm by 103mm by 55.6mm

 

Without Top:

Metric- 180mm by 143mm by 22.4mm

Standard- 205mm by 103mm by 24.3mm

 

3/8 Link 

 

¼ Link

Profile Link 

https://www.printables.com/@SBarler_5282717 

If you have any questions or comments, please let me know!

Tagi