1 / 9
Craftsman 1/2 Drive Socket Holders — image 1
1 / 9

Craftsman 1/2 Drive Socket Holders

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holds all your Craftsman sockets in organized slots

Rating
0 / 5
Likes
2
Downloads
2
Makes
0
Views
29
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

I made a bunch of socket set holders for 1/2, 3/8, and 1/4.  These sets are based on the craftsman sockets.

 

Sizes Included in ½ Drive Set:

Metric- 15mm-27mm

Standard- 5/8, 11/16, ¾, 3/16, 7/8, 15/16, 1", 1" 1/16, 1" 1/8, 1" 1/4

 

I personally used three different colors to distinguish ½, 3/8, and ¼, and used color-coded latches to distinguish between Metric and Standard Socket sets.  I also added a different latch for 12-point sockets to further contrast with the normal 6-point sockets.  The boxes only need two latches per box, so don't print all four that are included in the 3MF files (unless needed).  I recommend 5-10% infill and no supports for the best results.  I used some brass stock for the hinges (2.4mm rods).  A 2.4-2.6mm screw or rod should work too.  I used a fine-point Sharpie for the black lettering, but if you have a printer with multicolor printing, you can use that.   

 

Sizes Of Boxes:

Metric- 180mm by 143mm by 51.8mm 

Standard- 205mm by 103mm by 55.6mm

 

Without Top:

Metric- 180mm by 143mm by 22.4mm

Standard- 205mm by 103mm by 24.3mm

 

3/8 Link 

 

¼ Link

Profile Link 

https://www.printables.com/@SBarler_5282717 

If you have any questions or comments, please let me know!

Tags