CYD ESP-32 Case For Battery GPS Mod Kit - Reinforced Tactical Gundam Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CYD ESP-32 Case For Battery GPS Mod Kit - Reinforced Tactical Gundam Edition
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Description
A variation of two other CYD housings.
For Best Results:
Print in PETG or PLA with 15% infill or higher
Requires:
(7) M3x4x4 or M3x5.7x4.6 Heat Press Inserts.
(4) M3x6 Socket Head Screws.
(4) M3x12 Socket Head Screws.
Changes Include:
Expanded housing space to fit 1100mAh battery.
Relocated stand-offs and mounting screws for GPS + Battery PCB from Hedge Tech.
Relocated charge port and power switch location. ( Side mount Only, No port on bottom)
REMOVED bottom port for CYD board connection to usb-c access. MUST USE GPS + Battery PCB from Hedge Tech board has charging port.
Added border for better screen protection
Removed stylus hole A variation of two other CYD housings.
Added Gundam styling for 10x cool factor.
Final Note:
New layout with "on" switch and charging port located on the left side, This ONLY WORKS WITH the GPS + Battery PCB from Hedge Tech. Fits 1100mAh Battery.
Remember to split to objects before printing.