1 / 5
Track Saw Right Angle Guide For Vevor Track Saw Guide Rail — zdjęcie 1
1 / 5

Track Saw Right Angle Guide For Vevor Track Saw Guide Rail

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Track Saw Right Angle Guide For Vevor Track Saw Guide Rail Tight Friction Fit Design.

Ocena
0 / 5
Polubienia
5
Pobrania
18
Wydruki
0
Wyświetlenia
126
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Track Saw Right Angle Guide For Vevor Track Saw Guide Rail Tight Friction Fit Design.  I took inspiration from other models out there, but I drew this model from scratch using dimensions directly from the track I have.

This fits the Vevor track, and while they state this track is compatible with other track saws (Makita, Festool, and WEN).  I can't confirm which saws specifically and if they would also work with this guide in place (due to clearance of the guide, etc.).  I do know that it definitely works with the Vevor battery 5.5" battery powered track saw.

I personally prefer to use clamps with these tracks whenever I can, but for a quick cut or where clamps might not fit (or if you don't have any) this can do the trick.

It may fit really tight especially where supports had to be used in the print so a little bit of filing might be necessary but I wanted the tight fit so there's no wobble.

I printed with 6 wall loops with a 0.4mm nozzle and 15% gyroid infill.  Printed in PLA which seems to work fine, but if you're using this out in hot environments PETG or anything with better heat resistance would probably be a better choice.