1 / 5
Track Saw Right Angle Guide For Vevor Track Saw Guide Rail — image 1
1 / 5

Track Saw Right Angle Guide For Vevor Track Saw Guide Rail

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Track Saw Right Angle Guide For Vevor Track Saw Guide Rail Tight Friction Fit Design.

Rating
0 / 5
Likes
5
Downloads
18
Makes
0
Views
126
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Track Saw Right Angle Guide For Vevor Track Saw Guide Rail Tight Friction Fit Design.  I took inspiration from other models out there, but I drew this model from scratch using dimensions directly from the track I have.

This fits the Vevor track, and while they state this track is compatible with other track saws (Makita, Festool, and WEN).  I can't confirm which saws specifically and if they would also work with this guide in place (due to clearance of the guide, etc.).  I do know that it definitely works with the Vevor battery 5.5" battery powered track saw.

I personally prefer to use clamps with these tracks whenever I can, but for a quick cut or where clamps might not fit (or if you don't have any) this can do the trick.

It may fit really tight especially where supports had to be used in the print so a little bit of filing might be necessary but I wanted the tight fit so there's no wobble.

I printed with 6 wall loops with a 0.4mm nozzle and 15% gyroid infill.  Printed in PLA which seems to work fine, but if you're using this out in hot environments PETG or anything with better heat resistance would probably be a better choice.