drip tray for Itho Daalderop HRU ECO 300
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
drip tray for Itho Daalderop HRU ECO 300 with drainhole
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 9
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Our Itho Daalderop HRU ECO 300 ventilation unit was leaking water onto the floor from the front right of the unit. This ventilation unit has a design flaw in where its drain outlet sit higher than the bottom of the unit. Water from condensation then pools inside and eventually leaks out.
As it was leaking onto our laminate flooring, a solution was needed. I designed this drip tray that mounts from underneath using one of the original screwholes of the unit. You need an M6x30 bolt (I used one with a pozidriv head). The tray had a drainhole that fits a hose with a 9 mm inner diameter.
You need to remove the original drain hose from the unit to install the drip tray. The drip tray has a cutout for the drain hose, so it can be reinstalled.
The original model is available on OnShape: https://cad.onshape.com/documents/683957ad32abe752ff1f0460/w/72ec16a9f7290b4ccf5f4d2c/e/b4464b772b6b12d705751e37