drip tray for Itho Daalderop HRU ECO 300
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
drip tray for Itho Daalderop HRU ECO 300 with drainhole
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Our Itho Daalderop HRU ECO 300 ventilation unit was leaking water onto the floor from the front right of the unit. This ventilation unit has a design flaw in where its drain outlet sit higher than the bottom of the unit. Water from condensation then pools inside and eventually leaks out.
As it was leaking onto our laminate flooring, a solution was needed. I designed this drip tray that mounts from underneath using one of the original screwholes of the unit. You need an M6x30 bolt (I used one with a pozidriv head). The tray had a drainhole that fits a hose with a 9 mm inner diameter.
You need to remove the original drain hose from the unit to install the drip tray. The drip tray has a cutout for the drain hose, so it can be reinstalled.
The original model is available on OnShape: https://cad.onshape.com/documents/683957ad32abe752ff1f0460/w/72ec16a9f7290b4ccf5f4d2c/e/b4464b772b6b12d705751e37