Automatic Soap Dispenser Holder with Drip Catcher – Fits 3" Diameter Touchless Dispensers (OHIFAST style & similar)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One-piece holder for 3" automatic soap dispensers with built-in 3×2" drip catcher. Clean counter, no more soap mess.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
Full Description:
One-piece 3D-printable holder designed specifically for cylindrical automatic/touchless liquid soap dispensers that measure approximately 3 inches (76.2 mm) in diameter - including popular models such as the OHIFAST 12.8 oz / 380 mL USB-rechargeable dispensers and similar units.
Key Features & Measurements
Main holder opening: 3 inches (76.2 mm) diameter
Main walls: 3 mm thick × 5 mm tall — keeps the dispenser securely in place
Base: solid 3 mm thick
Drip catcher: 1 inch (25.4 mm) wide × 1.5 inches (38.1 mm) long protrusion with a smoothly rounded end
Catcher walls: 3 mm thick × 3 mm tall — contains drips while remaining easy to wipe clean
Fully one-piece design — no assembly required
Open connection between the main holder and the catcher so any overflow can flow naturally into the tray
The catcher is positioned on one side so you can orient the dispenser with its spout pointing toward the tray. This catches the common post-dispense drips that otherwise leave messy spots on the counter.
Print Recommendations
Layer height: 0.2 mm
Perimeters: 3–4
Infill: 15–20 %
No supports needed (prints flat on the build plate)
Material: PLA, PETG, or ABS all work well
Designed to look clean and modern next to the dispenser on a bathroom or kitchen counter. Enjoy a tidier surface with far less soap mess!
Happy printing!