1 / 2
Enclosed Laucher V2 (Print in Place No Supports!) — zdjęcie 1
1 / 2

Enclosed Laucher V2 (Print in Place No Supports!)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A launcher that is in an enclosed chamber

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

An enclosed launcher is designed to load powerful balls through the loading hole. To operate it, pull the trigger bar back about three-quarters of the way, then push it forward to fire. After that, pull it back again to reload.

No support structures are needed for printing. An infill percentage of 10-20% is recommended, with cubic infill being the best option. Use 2-3 wall loops, along with an alternating extra wall loop for added strength.

If you like this model, consider tipping to support Fonn Prints and help us with future models and more! 

Tagi