Desk Cable Organizer — 5 Channels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
keeps power, USB and HDMI cables sorted along the edge of your desk.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Keeps power, USB and HDMI cables sorted along the edge of your desk.
Six combs form five 8 mm channels, each with a retaining tab so the
cable does not pop out when you tug it.
The underside is flat for double-sided tape — no screws, no drilling.
DIMENSIONS
100 × 34 × 16 mm
Channels: 5 × 8 mm wide
PRINT SETTINGS
Layer height 0.20 mm
Infill 20%
Perimeters 3
Nozzle 0.4 mm
Supports NOT needed
Material PLA
Print time ~1 h 45 m
Filament ~23 g
NOTES
- Print as oriented, base on the bed. The retaining tabs are 1.2 mm
bridges — any printer handles them.
- Clean the plate with IPA before printing: the flat base needs good
adhesion or it will lift at the corners.
- If the tabs grip too tightly for your cables, set Horizontal
Expansion to -0.05 mm in your slicer.
If you find this useful, I make a pack of 10 print-ready functional
models — cable management, workshop, car and Raspberry Pi parts: