Desk Cable Organizer — 5 Channels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
keeps power, USB and HDMI cables sorted along the edge of your desk.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 6
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Keeps power, USB and HDMI cables sorted along the edge of your desk.
Six combs form five 8 mm channels, each with a retaining tab so the
cable does not pop out when you tug it.
The underside is flat for double-sided tape — no screws, no drilling.
DIMENSIONS
100 × 34 × 16 mm
Channels: 5 × 8 mm wide
PRINT SETTINGS
Layer height 0.20 mm
Infill 20%
Perimeters 3
Nozzle 0.4 mm
Supports NOT needed
Material PLA
Print time ~1 h 45 m
Filament ~23 g
NOTES
- Print as oriented, base on the bed. The retaining tabs are 1.2 mm
bridges — any printer handles them.
- Clean the plate with IPA before printing: the flat base needs good
adhesion or it will lift at the corners.
- If the tabs grip too tightly for your cables, set Horizontal
Expansion to -0.05 mm in your slicer.
If you find this useful, I make a pack of 10 print-ready functional
models — cable management, workshop, car and Raspberry Pi parts: