1 / 2
Jabberwocky Cutter Cover for Trident R2 Front Idlers — zdjęcie 1
1 / 2

Jabberwocky Cutter Cover for Trident R2 Front Idlers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cover for the Trident R2 beefy front idlers for the Jabberwocky filament cutting lever to press against

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is a cover that slides over the front idlers of the Trident R2 so that the Jabberwocky toolhead's filament cutting arm has something to press against.

The fit over the idlers is meant to be slightly snug so that it stays on by friction.

Print in ABS/ASA, 0.2-0.3mm layer height, 15-20% Gyroid infill or similar.

Tagi