Longer Shelf for RepRack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a longer shelf (More depth) that worked with the RepRack system so I could mount my PrintDry on the wall.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 498
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a longer shelf (More depth) that worked with the RepRack system so I could mount my PrintDry on the wall.
This was remixed from the RepRack shelf originally by chking
These where printed in PLA+ with 15% infill and no top or bottom skin on my Ender 3 MAX.
They are currently supporting the PrintDry with additional chamber kit (5.5kg) and 4 x 1 kg spools of filament and have only a small bow to show for being up for just over a month.
I will do a 3rd version with more support across the front and back off the shelf to add a bit more support.