ESRack - Module 2U - Acemagician / NiPoGi AM06 Pro (with Keystone Ports)

ESRack 2U Module – Acemagician / NiPoGi AM06 Pro (with Keystone Ports)

Attribution & Acknowledgements

This project is an extension/remix for the ESRack system originally designed by @EvilProphet. All credit for the brilliant modular rack design framework goes to the original creator.

Possible Configurations:
- [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short]
- [Mounting Bracket Medium] + [Module] + [Mounting Bracket Medium]
- [Mounting Bracket Short] + [Module] + [Mounting Bracket Long]
- [Mounting Bracket Long] + [Module] + [Mounting Bracket Short]
- [Mounting Bracket Long] + [Mounting Bracket Long] (Blank Front Plate)

Original ESRack System: Created under CC BY-NC-SA 4.0.

Design Note: This model was created with the assistance of Claude Opus 5.

Part Description

This module is designed to integrate an Acemagician / NiPoGi AM06 Pro Mini PC into the modular ESRack system. To make network management and front-panel connectivity seamless, each module features 2 integrated Keystone Jack slots (ideal for RJ45 couplers, USB pass-throughs, etc.).

To give you complete flexibility for your rack layout, this release contains 4 different versions:

1. With Front Holder / Keystones Right

2. With Front Holder / Keystones Left

3. Without Front Holder / Keystones Right

4. Without Front Holder / Keystones Left

Note: The package also includes the corresponding retaining bracket to lock the Mini PC securely in place.

Related ESRack 2U Models

Check out the other parts in this 2U ESRack series:

• ESRack 2U Mounting Brackets (Short / Medium / Long): Essential side brackets to mount your assembly into the rack rail.

• ESRack 2U Module – Ugreen CM953 2.5G Switch: A matching 2U module for the Ugreen CM953 2.5G desktop switch.

Suggested Print Settings

Follow the recommended ESRack print parameters for high structural strength:

• Material: PETG or PLA+ / Tough PLA (e.g., eSun PLA+)

• Nozzle Size: 0.4 mm

• Layer Height: 0.2 mm

• Wall Loops / Perimeters: 3 - 4

• Top / Bottom Layers: 4 Top, 5 Bottom

• Infill: ≥ 25% (Gyroid or Grid recommended)

• Orientation: Print flat on the front surface

• Supports: Not required with proper orientation

Required Assembly Hardware

To connect this module to other ESRack components (brackets or adjacent modules), you will need the standard ESRack assembly hardware:

• 4x M4 Hex Nuts (DIN 934)

• 4x M4x12mm Socket Head Cap Screws / Allen Screws (DIN 912)

All my models.

If this model helped you and you can and like to support me, Buy Me A Coffee