Liczymy pasujące modele…
This was my first attempt at making/remixing anything, so any feedback would be appreciated. I've had zero issues printing this using the following- Material: PLA+/PETG (I used sunlu petg) Nozzle: 0.4 mm Layer height: 0.2 mm Infill: 15%…
Wydruk około 5,29 €–6,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
I really liked the original ESRack system design created by @EvilProphet . Although it has mounts for many devices it lacked mounts for Raspberry Pi. Therefore I present one designed by me for this specific passive cooler that could be…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Rackmount for the 4-port ezcoo KVM 4x1 switches that are recommended integration with PiKVM for controlling 4 machines. Supported devices include: ezcoo EZ-SW41HA-KVMU3P (ideal for PiKVM) ezcoo EZ-SW41HA-KVMU3L
Rack mount Gateway Fiber/Cloud Gateway Fiber (UXG-Fiber/UCG-Fiber) for 19 inches rack. Due to the device is too wide the mounts are not detachable. It is exactly 9.5 inches wide so it is possible to use with another device in the same…
ESRack Module for Raspberry Pi. Tested with Raspberry Pi 4 but should be compatible with 5 as well as dimensions are the same. This module is half as wide as the regular ESRack module. One can use an adapter to get a full width module…
I really liked the original ESRack system design created by @EvilProphet . I create my own support for NiPoGi AM02 Pro from the Blank Module and share it here You need to remove the 4 gum footer and readd screw You can put the NiPoGi AM02…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Sky Stream Decoder from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
ESRack system design created by @EvilProphet Used for compatibility with narrow modules
Thanks to the hard work by @EvilProphet, the ESRack System is such a joy to work with. Please ignore the tessellation lines that might show while viewing the model on your monitor. They are caused by Boolean Merge. They do not appear in,…
I really liked the original ESRack system design created by @EvilProphet . I create my own support for GPON Terminal Huawei HG8010Hv3 from the Blank Module and share it here You can put the Huawei HG8010Hv3 on 2 side (connecting on front…
Description I acquired a lot of Dell Wyse 5060 for my homelab and @EvilProphet 's excellent ESRack system fit the ticket for racking them. I whipped this bracket for my 5060s / N07Ds. The ESRack system includes the following components:…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
This was my first attempt at making/remixing anything, so any feedback would be appreciated. I've had zero issues printing this using the following- Material: PLA+/PETG (I used sunlu petg) Nozzle: 0.4 mm Layer height: 0.2 mm Infill: 15%…
Wydruk około 5,29 €–6,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a remix for the Huawei HG8010N-10. The original HG8010 is smaller and does not fit.
Thanks to the hard work by @EvilProphet, the ESRack System is such a joy to work with. Please ignore the tessellation lines that might show while viewing the model on your monitor. They are caused by Boolean Merge. They do not appear in,…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
ESRack Module for Raspberry Pi. Tested with Raspberry Pi 4 but should be compatible with 5 as well as dimensions are the same. This module is half as wide as the regular ESRack module. One can use an adapter to get a full width module…
ESRack system design created by @EvilProphet Used for compatibility with narrow modules
I added to the wonderful ESRack collection originated by @EvilProphet. I designed this module using Fusion. It fits a BeeLink EQR6 + 1 JetKVM + 2 Keystone jacks in a single 2U ESRack bracket. According to BeeLink website, EQR7, EQRi12 and…
This is ESRack module for GL.iNet Comet Pro (GL-RM10) This module is half as wide as the regular ESRack module. One can use an adapter to get a full width module ESRack system design created by @EvilProphet . Version changes: V2 - Made…
Needed a place to put my USB Optical Drive for when I rip my media and found the ESRack Template, added in the dimensions for the Verbaitim 43888 optical drive I have and now I've got a cleanly rack mounted optical drive. Just note that…
A Rack Mount compatible with Virgin Media Superhub 5. IMPORTANT: THIS MODULE IS NOT FULLY COMPATIBLE WITH ALL OTHER ESRACK MODULES. This model will not fit alongside a normal ESRack Module in a 19" rack, to combat this issue, I have…
Custom Resized Version of the rack (I had Claude resize the medium bracket) and Stacked+Joined it (done in blender) to make it 2U and compatible with the Virgin Hub 5 Rack Mount I remixed.
This is ESRack module for containing brush in order to route wires in 19" rack. This module is half as wide as the regular ESRack module. Printing instructions The brush is implemented as one layer bridge to be able to print it with only…
Sturdy rack mount holder for https://cwwk.net/products/changwang-cwwk-intel-n100-n200-n305-processor-10g-ethernet-expansion-electrical-optical-aluminum-alloy-body-dual-copper-heat-sink-mini-pc?variant=47684182278376 This mount is…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
I really liked the original ESRack system design created by @EvilProphet . I create my own support for GPON Terminal Huawei HG8010Hv3 from the Blank Module and share it here You can put the Huawei HG8010Hv3 on 2 side (connecting on front…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Ubiquiti UniFi Switch Ultra from the Blank Module The module will also work for USW-Ultra-60W and USW-Ultra-210W The ESRack system includes…
Description I acquired a lot of Dell Wyse 5060 for my homelab and @EvilProphet 's excellent ESRack system fit the ticket for racking them. I whipped this bracket for my 5060s / N07Ds. The ESRack system includes the following components:…
Description I acquired a lot of Dell Wyse 5060 for my homelab and @EvilProphet 's excellent ESRack system fit the ticket for racking them. I whipped up this bracket to hold the power supplies for my 5060s / N07Ds. The intent was for this…
I've printed a bunch of stuff part of the ESRack system for my home rack but I didn't like the HP Elitedesk module by @EvilProphet , so I resized and combined the one created by @Spekkie3D and added ESRack side brackets. This retains all…
ESRack style flexible rackmount for the Anker Prime USB charging stations , which is perfect for powering multiple USB devices within the rack ( rack mount Raspberry Pi cluster ). Works with 19" and 10" ESRack rackmount ears . Added a…
Make your own custom ESRack device holder by just plugging in your device's dimensions! Go to this OnShape project Copy it to your account Change the variables at the top left to the dimensions you need (DeviceWidth, DeviceHeight,…
I liked this power brick holder idea, but the bottom plate was sitting slightly above the plate when laid flat. So I moved it to the bottom. I also shortened it slightly because it wouldn't quite fit on my mk3s+ bed.
I really liked the original ESRack system design created by @EvilProphet . I created a module for Philips Hue Bridge from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
I took off 2mm from the original mounting bracket by EvilProphet. One of my racks was off by 4mm and wouldn't fit. With the bracket having 2mm less width it provided enough room for me to slide in my rack. Hopefully this helps someone else.
ESRack 1U - Module - 2x Ubiquiti UniFi PoE AF
I really liked the original ESRack system design created by @EvilProphet . I created a module for Ubiquiti Unifi AI Key from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Ubiquiti Unifi CloudKey Gen2 Plus from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Ubiquiti Unifi Switch Flex Mini 2.5G from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the…
Introduction I've been printing a bunch of ESRack things for my work and home racks and I've always wanted to rackmount these annoying cable boxes. Unfortunately they have a case that's almost exactly 1U high, so the standard ESRack…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Netgear Switch GS308EP from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Ring Alarm Base Station Gen 2 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following…
I really liked the original ESRack system design created by @EvilProphet . I created a module for TP-Link Switch TL-SG108 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, avilable in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
The ESRack system includes components: Mounting Brackets - used to install unit in the rack, available in 3 sizes: Short Medium Long Device Modules - each module can handle a single device Possible Configurations: - [Mounting Bracket…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Ubiquiti Unifi Switch Flex 10 GbE USW-Flex-XG from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Zyxel Switch GS1200-8 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Apple TV 4K from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components: Mounting…
I really liked the original ESRack system design created by @EvilProphet . I created a module for MikroTik RB260GS from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
Tight fit for the Ser5 Pro, so the walls aren't as thick, due to the height of the device. I had to remove the rubber feet on the bottom of the device. I used supports on my print, though you may not have to depending on your printer's…
@EvilProphet made a really nice system called ESRack. Expanding on it, as it rocks The ESRack system includes the following components: Mounting Brackets - used to install the unit in the rack, available in 3 sizes: Short Medium Long…
Description @EvilProphet made a really nice system called ESRack. Expanding on it. The ESRack system includes the following components: Mounting Brackets - used to install the unit in the rack, available in 3 sizes: Short Medium Long…
For the older version of Topton N150 Fanless computer. It was a tight fit. Dimensions D= 126.76 W =136.51 H= 44.37
ESRack is a very good modular rack mount system created by @EvilProphet . I created a module for Time Machines TM100A from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
Description ESRack is a very good modular rack mount system created by @EvilProphet . I created a module for the MikroTik CR305-1G-4S+IN from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the…
I really liked the original ESRack system design created by @EvilProphet . I created a module for TP-Link TL-SG1008P from the ESRack Customizable Device Mount The ESRack system includes the following components: Mounting Brackets - used…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Gateway Yubii Home from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
I really liked the original ESRack system design created by @EvilProphet . I created a module for D-Link Switch DMS-108 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
I really liked the original ESRack system design created by @EvilProphet . I created a module for D-Link Switch DGS-108 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
A mount for the Calix GP1101X XGS-PON ONT in the ESRack system by @EvilProphet, based on the dimensions in the datasheet (135mm x 135mm x 33mm), but not yet verified IRL. I don't have fiber service yet, but it's coming in a few months and…
I had a breakage - so added some strength, it's a lot more stable. Great work on the ES Rack Series as a whole though !
This remix adds a lot of strength, at the cost of quite a bit of filament. Also added a lot of strength to the front plate. Really stops any flex in the part when weight is added.
I really liked the original ESRack system design created by @EvilProphet . I created a Mounting Bracket medium for a single keystone connector. This way you can use a Module to hold your modem our router with connections on the back and…
I really liked the original ESRack system design created by @EvilProphet . I created a customized a module to hold my specific modem. I have it sticking out from flush intentionally so you can see the status lights on top. If you would…
Part Description ESRack Module for the TP-LINK TL-SG108E. The dimensions are slightly different from the SG108. Possible Configurations: - [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short] - [Mounting Bracket…
Part Description ESRack Module for the Fritzbox 6690 Cable. Uses 2U Possible Configurations: - [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short] - [Mounting Bracket Medium] + [Module] + [Mounting Bracket Medium] -…
Fits ESRack mounts and other accessories used Elegoo PLA
This is an ESRack “Mini” blank module. The “Mini” denotes ESRack modules made for 10" or mini server racks like the DeskPi RackMate. This module is resized to about 203mm which leaves enough room for the ESRack mounting ears and a bit of…
A Banana Pi R4 module for 10" mini server racks using the ESRack system remixed to support mini racks. The peripheral cutouts and mounting chassis, which this project also remixes, were developed by @kju in this great print:…
I really like the ESRack system by @EvilProphet , but it lacked JetKVM module, so I created one similar to JetKVM mount by @JaredC01 Print on front face without supports. To secure the device, you'll need 2x M2x16 screws. This is of one…
Print with the same recommendations as ESRack The model is split into to, a bottom 2U unit and a top 1U unit, the 2 halves can be screwed together with M10x14mm nuts and bolts. the bottom half can be printed on a bed surface area of…
Allows to mount the SMLight Zigbee sticks on a standard rack with the ESRack ecosystem. Also allows a keystone jack to installed for the zigbee stick. The zigbee stick is friction fit into its slot with no other support or lock in…
Used the no-keystone variant of the original and added a slot for a generic PoE splitter. I left the hub itself in the middle and put the splitter off to one side. It does result in close quarters for getting to nuts or screws on that…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
A place for my Fritz!Box using the excellent ESRack system by @EvilProphet . It's a huge print, it barely fits on the bed of my Sovol SV08… but the width of the Fritz!Box is larger than a 50% module, so I went this route. If you try using…
A place for my Unifi PoE injectors using the excellent ESRack system by @EvilProphet . (height: 1 Rack unit) There already are other Unifi holders for ESRack - but since I have a mix of models (and each of the dozen or so PoE injectors by…
ESRack module for Fujitsu Futro S740ESRack module for Fujitsu Futro S740 Fitting to the fabulous ESRack Ecosystem by EvilProphet Suggested Print Settings Material: PETG Nozzle: 0.4 mm Layer height: 0.25 mm Wall loops: 3 Top/Bottom shell…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Philips Hue Bridge from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
“ESRack - Module 250- Blank” is 50 mm wider than original module created by @EvilProphet To create 19" rack module it need to be used together with “ESRack - Module 150 - Blank” or some modules designed based on this short version It is…
“ESRack - Module 150- Blank” is 50 mm shorter than original module created by @EvilProphet To create 19" rack module it need to be used together with “ESRack - Module 250 - Blank” or some modules designed based on this long version…
ESRack - Module 250 - Unifi USW-Flex-2.5G-8 is creatated based on “ESRack - Module 250- Blank” is 50 mm wider than original module created by @EvilProphet To create 19" rack module it need to be used together with “ESRack - Module 150 -…
