ESRack Module for Fritzbox 6690
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an ESrack Module for the Fritzbox 6690 Cable
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 531
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Part Description
ESRack Module for the Fritzbox 6690 Cable. Uses 2U
Possible Configurations:
- [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short]
- [Mounting Bracket Medium] + [Module] + [Mounting Bracket Medium]
- [Mounting Bracket Short] + [Module] + [Mounting Bracket Long]
- [Mounting Bracket Long] + [Module] + [Mounting Bracket Short]
- [Mounting Bracket Long] + [Mounting Bracket Long] (Blank Front Plate)
Suggested Print Settings
Material: PLA+/PETG (I used eSun PLA+)
Nozzle: 0.4 mm
Layer height: 0.2 mm
Wall loops: 3
Top/Bottom shell layers: 3
Infill: +25%
Infill pattern: Gyroid
Orientation: Print on front surface
Support: Not needed when correct orientation is used
High infill is needed to avoid bending after installing equipment. I used 20% infill and with heavy equipment it's bend a bit.
Assembling
To connect this module, you need:
- 8x M4 nuts (DIN934M4)
- 8x M4x12 allen screws (DIN912M4x12-8.8)
Use standard rack screws and nuts for rack mounting.