ESRack Module for Fritzbox 6690
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an ESrack Module for the Fritzbox 6690 Cable
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 56
- Makes
- 1
- Views
- 531
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Part Description
ESRack Module for the Fritzbox 6690 Cable. Uses 2U
Possible Configurations:
- [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short]
- [Mounting Bracket Medium] + [Module] + [Mounting Bracket Medium]
- [Mounting Bracket Short] + [Module] + [Mounting Bracket Long]
- [Mounting Bracket Long] + [Module] + [Mounting Bracket Short]
- [Mounting Bracket Long] + [Mounting Bracket Long] (Blank Front Plate)
Suggested Print Settings
Material: PLA+/PETG (I used eSun PLA+)
Nozzle: 0.4 mm
Layer height: 0.2 mm
Wall loops: 3
Top/Bottom shell layers: 3
Infill: +25%
Infill pattern: Gyroid
Orientation: Print on front surface
Support: Not needed when correct orientation is used
High infill is needed to avoid bending after installing equipment. I used 20% infill and with heavy equipment it's bend a bit.
Assembling
To connect this module, you need:
- 8x M4 nuts (DIN934M4)
- 8x M4x12 allen screws (DIN912M4x12-8.8)
Use standard rack screws and nuts for rack mounting.